Gas Fired Water Heater | Ruud SPIDERfire Series

The most advanced technology available at that time is used in this heater. It is totally reliable and efficient – 95% thermal efficiency. There is no need of a chimney. It uses NOx burner design and therefore only emits low NOx emissions and hence it is extremely eco friendly. If you are in search of water heating efficiency then the one you have to take along with you is definitely the Ruud gas fired water heater – SPIDERfire.

The thermal efficiency of the Ruud Commercial Gas SPIDERfire is about 95% and therefore reduces the operating costs.
There is absolutely no need of a chimney for this ultra high efficiency water heater.
The emissions are almost negligible since the burner uses Low NOx design. It is designed to meet SCAQMD Rule 1146.2
It is resistant to corrosion.
The unit also features an inbuilt Self–diagnostic LCD electronic control that helps in effective monitoring of the water heater.
The ignition this heater uses is direct spark and the maximum temperature that can be set is at 185° F.
There is a full flow drain valve present.
There are water connections both at the front and the back.

This series of ultra high efficiency water heaters is very suitable for commercial establishments as the thermal efficiency is about 95% and therefore very economical. There is no need of a chimney for this heater.

All the emissions emitted by this heater are very low as the burner uses its Low NOx burner; therefore it is very suitable for industry use. Safety is not an issue with this model as it has an inbuilt Self Diagnostic LCD electronic control. Ignition type – direct spark and is therefore easy to handle as no need of external combustion. It can heat up to a temperature of 185° F.

(A) - ASME Tank Construction available.
All models require a 120V power source.Commercial Gas Fired Water Heater
Ruud SPIDERfireGas Input
BTU/HR.Recovery Capacities In Gallons/HR.Maximum Delivery In GallonsModel NumberGallon CapacityNatural Gas
&
PropaneThermal Efficiency40°90°140°Temp. Rise5 Min.15 Min.60 Min.3 HR.

If you are out looking for a heater for your industry then you have come to the right place. The Ruud Commercial Gas – SPIDERfire is the best you can ever get. It is the most suitable for any industry as it is very compact and consumes the least space.

Its water heating efficiency is about 95% at maximum performance. If you don't have a chimney that's not a need to worry as this heater doesn't require one and this is a big plus point. There is absolutely no chance of your heater getting corroded as it's built with the best materials and technologies.

It is completely safe to use as it has an inbuilt safety device i.e. the Self Diagnostic Device – LCD display and electronically controlled. Direct spark technology is used for combustion purposes. Water connections are available both at the front and the back. You don't need to worry about emissions at all as the burners use Low NOx burner design and emissions are at a minimum.

The maximum temperature that it can heat upto is 185° F and is suitable for most of the industry requirements. A full flow drain valve is inbuilt within the ultra high efficiency water heater. Therefore the best solution for all your industry heating needs is the gas fired water heater from Ruud called SPIDERfire.